top of page

Home  ›  Products  ›  Shear Fixtures  ›  Ceramic Composite Shear Fixture

UGC-SF-150 ceramic composite shear fixture with specimen holder and probe for ASTM C1292 by Universal Grip
UGC-SF-150 ceramic composite shear fixture with specimen holder and probe for ASTM C1292 by Universal Grip
UGC-SF-150 Ceramic Composite Shear Fixture by Universal Grip, view 2
UGC-SF-150 Ceramic Composite Shear Fixture by Universal Grip, view 3
UGC-SF-150 Ceramic Composite Shear Fixture by Universal Grip, view 4

Ceramic Composite Shear Fixture – ASTM C1292

Compression shear fixture for notched fiber-reinforced ceramic specimens up to 10 mm thick, rated to 10 kN, for ASTM C1292 Fig. 1 testing.

Brand: Universal Grip  |  Model: UGC-SF-150  |  ● Configured to order

  • Built for ASTM C1292 Fig. 1 shear testing of fiber-reinforced ceramics

  • Accepts notched specimens 0–10 mm (up to 0.39 in) thick

  • Rated to 10 kN (2,248 lbf) maximum test load

  • Specimen holder and compression probe in nickel-plated steel

  • Standard 1.35 kg version with Ø 15.9 mm (5/8 in) female clevis

  • Two-part 0.5 kg version for use between upper and lower platens

Standards: ASTM C1292

Trusted by Global Companies

Shear strength testing of ceramic matrix composites

The UGC-SF-150 is for materials labs characterizing ceramic matrix composites (CMCs) and other fiber-reinforced ceramics at ambient temperature. It uses the double-notched compression arrangement of ASTM C1292, Fig. 1: a notched specimen stands in the lower specimen holder, an upper probe loads it in compression, and the material fails in interlaminar or in-plane shear on the plane between the two notches. The notch spacing sets the shear area, so the fixture's job is to load the specimen squarely and repeatably.

 

Fixture design

The holder accepts specimens from 0 to 10 mm (up to 0.39 in) thick. Holder and probe are nickel-plated steel and rated to 10 kN (2,248 lbf). Whether the specimen fails interlaminar or in-plane depends on how it is cut from the laminate, so the same fixture serves both directions.

 

Two versions

  • Standard fixture – specimen holder and compression probe with a Ø 15.9 mm (5/8 in) female clevis coupling; 1.35 kg without the lower platen. The lower compression platen is ordered separately.

  • Two-part fixture – a 0.5 kg version that runs between upper and lower compression platens, for machines already set up for compression work.

Choose the standard version if your load train uses clevis couplings, and the two-part version if your frame already carries compression platens and you would rather not change the set-up between tests.

 

Machine fit

A 10 kN benchtop universal testing machine matches the fixture rating; labs that also run flexure or tensile tests on composites often choose a 25 kN frame for headroom. We supply the compression platens and any adapters needed. The fixture is specified for 0 to +70 °C; other ranges on request.

 

Typical applications

  • Ceramic matrix composites

  • Fiber-reinforced ceramics in materials research

  • Aerospace thermal structures

  • Comparing fiber architectures and interphase coatings

 

Related composite shear fixtures

For polymer-matrix composites, see UGC-SF-230, the V-notched beam shear fixture (ASTM D5379 guide), and UGC-SF-250, the V-notched rail shear fixture (ASTM D7078 guide). Flexure fixtures for ceramics are on our bend testing fixtures page.

Tell us the specimen thickness, your machine coupling and which platens you already have, and we will quote the complete set-up.

Product video

At a glance

  • Test type: Shear of notched specimens, compression mode

  • Max. load: 10 kN (2,248 lbf)

  • Specimen thickness: 0–10 mm

  • Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin

  • Material: Steel, nickel-plated

  • Temperature range: 0 … +70 °C (others on request)

Ceramic Composite Shear Fixture Specifications

TEST TYPE

Shear of notched specimens, compression mode

 

MAX. LOAD

10 kN (2,248 lbf)

 

SPECIMEN THICKNESS

0–10 mm

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin

 

MATERIAL

Steel, nickel-plated

 

TEMPERATURE RANGE

0 … +70 °C (others on request)

 

WEIGHT

1.35 kg (without lower platen); two-part version 0.5 kg

 

SCOPE OF DELIVERY

Specimen holder and compression probe

 

LOWER COMPRESSION PLATEN

Ordered separately

 

STANDARD

ASTM C1292, Fig. 1

 

PART REF.

UGC-SF-150

 

Models & Options

  • Standard fixture — Holder + probe with Ø 15.9 mm coupling; 1.35 kg (Specify at order)

  • Two-part fixture — For use between upper and lower platens; 0.5 kg (Specify at order)

  • Compression platens — Lower platen for the standard fixture; upper and lower for the two-part version (On request)

What's Included

  • Specimen holder

  • Compression probe

  • Lower compression platen not included – order separately (two-part version needs upper and lower platens)

Supported Test Standards

  • ASTM C1292 — Shear strength of continuous fiber-reinforced advanced ceramics at ambient temperatures

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SF-230 V-Notched Beam Shear Fixture

UGC-SF-230 V-Notched Beam Shear Fixture

Iosipescu V-notched beam shear fixture for composite laminates, rated to 50 kN, with the compression probe and specimen

UGC-SF-250 V-Notched Rail Shear Fixture

UGC-SF-250 V-Notched Rail Shear Fixture

Pair of V-notched rail shear grips for composites to ASTM D7078, in 50 kN and 100 kN versions plus a -100 to +600 °C hig

UGC-SF-140 Shear Fixture with Cardan Joints ISO 1922

UGC-SF-140 Shear Fixture with Cardan Joints ISO 1922

Self-aligning shear fixture with two cardan joints for sandwich cores, rigid foams and adhesive joints, in parallel, ang

UGC-SF-160 Plywood Glue Bond Shear Fixture EN 314-1

UGC-SF-160 Plywood Glue Bond Shear Fixture EN 314-1

Compact compression shear fixture with polyamide jaws for checking the glue bond quality of plywood specimens to EN 314-

Ceramic Composite Shear Fixture FAQ

What specimens does the fixture accept?

Double-notched specimens of fiber-reinforced ceramic from 0 to 10 mm thick, as used in ASTM C1292, Fig. 1.

 

What is the maximum load?

10 kN (2,248 lbf).

 

Is the lower compression platen included?

No. The standard fixture includes the specimen holder and compression probe; order the lower compression platen separately.

 

What is the difference between the standard and two-part versions?

The standard version has a Ø 15.9 mm clevis coupling and weighs 1.35 kg. The two-part version weighs 0.5 kg and runs between upper and lower platens.

 

Can it test at elevated temperature?

It is specified for 0 to +70 °C, matching the ambient-temperature scope of ASTM C1292. Other ranges are available on request.

 

Do you have shear fixtures for polymer-matrix composites?

Yes, see the V-notched beam fixture UGC-SF-230 and V-notched rail fixture UGC-SF-250.

 

Need help configuring a shear fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page